Pictures - MM Update

Home Update Kit Contents Pictures - MM Update W-Arm Relocation
Up

CLICK ON ANY IMAGE BELOW FOR A LARGER VIEW
USE YOUR BROWSER'S BACK BUTTON TO RETURN HERE

GREATLY IMPROVED TRACK APPROACH ANGLE

17 to 21 Degree Angle after conversion gets you UP ON TOP of the Snow.

Click for Larger Image

STOCK APPROACH ANGLE

Stock 30 Degree Angle
Trenches and Pushes the Snow.
(This "stock" sled even has a rolled chain-case
You can see it doesn't help much)

 Click for Larger Image

NEW REAR TUNNEL EXTENSION

Provides Superior Track Clearance
for your NEW 159 to 141" Track!
(151" Extension shown here: All Extension are Powder Coated)
3 Extension Sizes: 141/44, 151, 156/59

 Click for Larger Image

STOCK TUNNEL

 Click for Larger Image

 

Anti-ratchet Driver
Normally drives the inside of the track
BUT .. Also drives the windows
SO .. You can run your track loose for
MORE POWER TO THE GROUND

 Click for Larger Image

  The variability in the APPROACH ANGLE (17 to 21) is due to the setting of the limiter strap. Testing has shown that less than 19 or 20 degrees has no improvement in powder performance. 20 to 21 degrees is just right. The standard setting on our kit provides a 20 degree approach angle.

The 2000 Mountain Max is factory set at a 21degree Angle.

Back Next