|
MOUNTAIN TRIPLE PIPES
THIS SYSTEM WAS 1st PRODUCED in 1997. IT GREATLY REDUCES
SOUND OUTPUT OVER THE ORIGINAL TRIPLE PIPE SYSTEM WHILE STILL PRODUCING THE SAME LEVEL OF
PERFORMANCE.
IT ALSO FITS ELECTRIC START MODELS.
700cc
700cc
Models |
1997 - 2000 Mountain Max 700
1997 - 2000 SX, SXR, VMAX & Venture
This system will work with Electric Start |
| Power |
Stock |
109 hp, 71 ft-lbs. of torque |
| With Pipes |
133 hp, 82 ft-lbs. of torque |
| Increase |
24 BIG HORSES and 11 ft-lbs. of torque
(17 hp and 13 ft-lbs. more at 7000rpm) |
| Weight |
26.5 lbs. (that's less than
2lbs. more than the OEM Single pipe) |
| Sound |
94 dB (stock 81-82 dB) |
| Setup |
Stock |
* 10.3mm Al rivet in inner hole, none outer
* 97-99 (Short Spring) Yel-Sil-Yel (35 pre/2.25 rate)
* 2000 Yel-Wht-Yel
* 70deg Secondary pre-load |
| With Pipes |
* Aluminum Rivets in both holes
* 97-99 (Short Spring) Yel-Sil-Yel (35 pre / 2.5 rate)
Plus 2 shims
* 2000 (long spring) Yel-Wht-Yel (45 pre / 2.5 rate)
* NO JETTING CHANGE
* 60deg Secondary Pre-load |
| RPM |
Peak power at 8400 rpm (Stock peak also at 8400 rpm) |
|
600cc Triple
600cc
Models |
2000 Mountain Max 600
1999 - 2000 SX, SXR, VMAX & Venture
This system IS designed for use with Electric
Start |
| Power |
Stock |
98 hp |
| With Pipes |
118 hp |
| Increase |
20 BIG HORSES and ~10 ft-lbs. of torque
(~25 hp at 7000rpm) |
| Weight |
25.7 lbs. (that's less than
2lbs. more than the OEM Single pipe) |
| Sound |
94dB (stock 81-82 dB) |
| Setup |
Stock |
* 10.3mm Al rivet in inner hole, none outer
* Primary Grn-Pnk-Grn (30 pre / 2.75 rate)
* 80deg Secondary pre-load |
| With Pipes |
* No Rivets in Both Holes of New 8CR Weights
* Yel-Wht-Yek
* NO JETTING CHANGE
* 70deg Secondary Pre-load with Green Spring |
| RPM |
Peak power at 8400 rpm (Stock peak at 8500 rpm) |
|
