DIGITAL WATER or OIL TEMP GAUGE
|
| This compact size
digital gauge clearly indicates actual water temperature. Switchable from
Fahrenheit to Celsius, and has blue backlighting. Velcro mounting makes
instant installation on any flat surface a snap. Includes clock feature
& charges internal battery from sled.
A custom sending unit adaptor is also available. This is
an anodized billet Tee that allows you to tap into any coolant line.
Includes clamps.
|
Click
for Larger Image
|
| Digital Temp
Gauge |
US-Dollars |
| ggw-0100 |
Gauge
& Clock (does not include Tee) |
$119.95 |
| ggw-0250 |
Temp Sending Unit Adaptor & Clamps. |
$39.95 |
| |
|
|
| |
|
|
OPTIMATE BATTERY CHARGER
|
| Optimate III
Charger: One of the best chargers available on the market. Fully automatic
microprocessor controlled. Even charges deeply discharged maintenance-free
batteries, unlike most chargers available today. Includes a desulfate
cycle, a standard charge cycle and a maintenance charging cycle. With auto
switch over, there is nothing for you to do but connect it. Includes quick
connect harness that can be installed permanently on the sled &
alligator harness for use on other batteries. |
Click
for Larger Image
|
| Charger |
US-Dollars |
| mbt-0500 |
Optimate
III Charger |
$52.60 |
| |
|
|
| |
|
|
4 STROKE CHARGING CABLE
|
| This custom built
cable is designed to jump charge any Yamaha 4-Stroke battery from any snowmobile. Most
snowmobiles have an AC electrical system, making it impossible to directly
connect to the RX-1. Our cable has a built in power converter so it plugs
into any sleds head light (AC or DC). Don't be caught without one! |
Click
for Larger Image
|
| Charger |
US-Dollars |
| mbt-0400 |
Universal
Charging Cable |
$49.95 |
| |
|
|
| |
|
|
RX-1 TOP GEAR & JACKSHAFT
SOCKET
|
| This special tool
set is required to properly remove the top gear on a RX-1 or Warrior. 1
socket is designed to hold the jackshaft, while the other is a special
deep socket designed to fit over the jackshaft and remove the 36mm nut
that holds the top chaincase gear in place. Spec torque on this nut is 65
ft-lbs so pliers will not work! |
Click
for Larger Image
|
| Socket Set |
US-Dollars |
| gtc-0800 |
RX-1
Top Gear & Jackshaft Socket Set |
$49.95 |
| |
|
|
| |
|
|
CLUTCH ALIGNMENT TOOLS
|
| These clutch Alignment Tools are designed
for easy use. Set includes center-to-center bar and offset bar. The center-to-center bar
hooks over the jackshaft and the primary clutch center shaft (the primary doesn't have to
be removed), holding the center-to-center distance. |
Click
for Larger Images
|
| Clutch
Alignment |
US-Dollars |
| gtc-0100 |
Clutch
Alignment for 97 & Newer w/o electric start |
$39.95 |
| |
|
|
| |
|
|
HARDENED CLUTCH PULLER
|
| This YXR clutch puller is designed the same
as the factory pullers with one huge advantage. The OEM pullers are made of soft steel
which bends under load. This puller is heat treated hardened steel, which holds up under
load. |
Click
for Larger Images
|
| Clutch Puller |
US-Dollars |
| gtc-0201 |
Clutch
Puller 92 and Newer |
$28.95 |
| |
|
|
| |
|
|
CLUTCH SERVICE TOOL
|
| This tool allows you to easily
remove weights & rollers quickly without having to remove the primary
clutch cover. Saves time and wear & tear on the bushing. The tool
compresses the clutch quickly and easily while the locking bracket holds
it during service. It's a must for anyone who does clutch tuning! |
Click
for Larger Images
|
| Clutch Service
Tool |
US-Dollars |
| gtc-0300 |
Clutch
Service Tool 94 and Newer |
$29.95 |
| |
|
|
| |
|
|
YXR WEIGHT RIVET
INSTALLATION / REMOVAL TOOL
|
|
This tool makes removing and installing the YXR
weight rivets much easier. It works with any weight profile. The 1"
thick zinc coated steel base supports the weight, making it much easier to
remove the rivets, and provides excellent back up to peen over new rivets. NO
MORE GRINDING OUT RIVETS! |
Click
for Larger Images
|
| Weight Rivet
Install Tool |
US-Dollars |
| gtc-0600 |
All
Yamahas |
$49.95 |
| |
|
|
| |
|
|
YXR WEIGHT INSTALLATION TOOL
|
| This tool set allows you to easily line up the
washers and weights or rollers when installing the weight/roller pins on the YXR clutch. Simply put the
pieces in place, slide the tool through and finally slide the pin through.
Set of 2: 9mm for Roller pins
8mm for Weight Pins
|
Click
for Larger Images
|
| Weight Install
Tool |
US-Dollars |
| gtc-0510 |
9mm Roller Only (for those who
previously
purchased the gtc-0500 8mm tool) |
$8.95 |
| gtc-0550 |
All
Yamahas |
$15.95 |
| |
|
|
| |
|
|
VIPER & SRX POWER VALVE TESTER
|
| Now With OEM Connector; Only
From MPI. This tool allows you to easily check and set your power
valves properly to insure optimum engine performance. The tester plugs
directly into the wiring harness with no modifications. Simply plug it in,
hook up a 12-volt source and check your power valve settings. Detailed
instructions & adjustment specifications included. The OEM Spec just
isn't good enough! You must cycle the valves and set them by touch! Don't
miss that extra stock HP! |
Click for Larger Image
|
| Power Valve
Tester |
US-Dollars |
| gtm-0300 |
All
SRX and Viper |
$35 |
| |
|
|
| |
|
|
